每天一个linux命令（54）：ping命令-白红宇

每天一个linux命令（54）：ping命令

阅读量：4496 次

发布时间：2019-06-08

本文共 8255 字，大约阅读时间需要 27 分钟。

Linux系统的ping命令是常用的网络命令，它通常用来测试与目标主机的连通性，我们经常会说“ping一下某机器，看是不是开着”、不能打开网页时会说“你先ping网关地址192.168.1.1试试”。它通过发送ICMP ECHO_REQUEST数据包到网络主机（send ICMP ECHO_REQUEST to network hosts），并显示响应情况，这样我们就可以根据它输出的信息来确定目标主机是否可访问（但这不是绝对的）。有些服务器为了防止通过ping探测到，通过防火墙设置了禁止ping或者在内核参数中禁止ping，这样就不能通过ping确定该主机是否还处于开启状态。

linux下的ping和windows下的ping稍有区别,linux下ping不会自动终止,需要按ctrl+c终止或者用参数-c指定要求完成的回应次数。

1.命令格式：

ping [参数] [主机名或IP地址]

2.命令功能：

ping命令用于：确定网络和各外部主机的状态；跟踪和隔离硬件和软件问题；测试、评估和管理网络。如果主机正在运行并连在网上，它就对回送信号进行响应。每个回送信号请求包含一个网际协议（IP）和 ICMP 头，后面紧跟一个 tim 结构，以及来填写这个信息包的足够的字节。缺省情况是连续发送回送信号请求直到接收到中断信号（Ctrl-C）。

ping 命令每秒发送一个数据报并且为每个接收到的响应打印一行输出。ping 命令计算信号往返时间和(信息)包丢失情况的统计信息，并且在完成之后显示一个简要总结。ping 命令在程序超时或当接收到 SIGINT 信号时结束。Host 参数或者是一个有效的主机名或者是因特网地址。

3.命令参数：

-d 使用Socket的SO_DEBUG功能。

-f 极限检测。大量且快速地送网络封包给一台机器，看它的回应。

-n 只输出数值。

-q 不显示任何传送封包的信息，只显示最后的结果。

-r 忽略普通的Routing Table，直接将数据包送到远端主机上。通常是查看本机的网络接口是否有问题。

-R 记录路由过程。

-v 详细显示指令的执行过程。

<p>-c 数目：在发送指定数目的包后停止。

-i 秒数：设定间隔几秒送一个网络封包给一台机器，预设值是一秒送一次。

-I 网络界面：使用指定的网络界面送出数据包。

-l 前置载入：设置在送出要求信息之前，先行发出的数据包。

-p 范本样式：设置填满数据包的范本样式。

-s 字节数：指定发送的数据字节数，预设值是56，加上8字节的ICMP头，一共是64ICMP数据字节。

-t 存活数值：设置存活数值TTL的大小。

4.使用实例：

实例1：ping的通的情况

命令：

ping 192.168.120.205

输出：

[root@localhost ~]# ping 192.168.120.205PING 192.168.120.205 (192.168.120.205) 56(84) bytes of data.64 bytes from 192.168.120.205: icmp_seq=1 ttl=64 time=0.720 ms64 bytes from 192.168.120.205: icmp_seq=2 ttl=64 time=0.181 ms64 bytes from 192.168.120.205: icmp_seq=3 ttl=64 time=0.191 ms64 bytes from 192.168.120.205: icmp_seq=4 ttl=64 time=0.188 ms64 bytes from 192.168.120.205: icmp_seq=5 ttl=64 time=0.189 ms--- 192.168.120.205 ping statistics ---5 packets transmitted, 5 received, 0% packet loss, time 4000msrtt min/avg/max/mdev = 0.181/0.293/0.720/0.214 ms[root@localhost ~]#

说明：

实例2：ping不通的情况

命令：

ping 192.168.120.202

输出：

[root@localhost ~]# ping 192.168.120.202PING 192.168.120.202 (192.168.120.202) 56(84) bytes of data.From 192.168.120.204 icmp_seq=1 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=2 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=3 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=4 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=5 Destination Host UnreachableFrom 192.168.120.204 icmp_seq=6 Destination Host Unreachable--- 192.168.120.202 ping statistics ---8 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7005ms, pipe 4[root@localhost ~]#

说明：

实例3：ping网关

命令：

ping -b 192.168.120.1

输出：

[root@localhost ~]# routeKernel IP routing tableDestination     Gateway         Genmask         Flags Metric Ref    Use Iface192.168.120.0   *               255.255.255.0   U     0      0        0 eth0192.168.0.0     192.168.120.1   255.255.0.0     UG    0      0        0 eth010.0.0.0        192.168.120.1   255.0.0.0       UG    0      0        0 eth0default         192.168.120.240 0.0.0.0         UG    0      0        0 eth0[root@localhost ~]# ping -b 192.168.120.1PING 192.168.120.1 (192.168.120.1) 56(84) bytes of data.64 bytes from 192.168.120.1: icmp_seq=1 ttl=255 time=2.02 ms64 bytes from 192.168.120.1: icmp_seq=2 ttl=255 time=1.83 ms64 bytes from 192.168.120.1: icmp_seq=3 ttl=255 time=1.68 ms64 bytes from 192.168.120.1: icmp_seq=4 ttl=255 time=1.98 ms64 bytes from 192.168.120.1: icmp_seq=5 ttl=255 time=1.88 ms--- 192.168.120.1 ping statistics ---5 packets transmitted, 5 received, 0% packet loss, time 4000msrtt min/avg/max/mdev = 1.682/1.880/2.020/0.129 ms

说明：

实例4：ping指定次数

命令：

ping -c 10 192.168.120.206

输出：

[root@localhost ~]# ping -c 10 192.168.120.206PING 192.168.120.206 (192.168.120.206) 56(84) bytes of data.64 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=1.25 ms64 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.260 ms64 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.242 ms64 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.271 ms64 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=0.274 ms64 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=0.295 ms64 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.269 ms64 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.270 ms64 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.253 ms64 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.289 ms--- 192.168.120.206 ping statistics ---10 packets transmitted, 10 received, 0% packet loss, time 9000msrtt min/avg/max/mdev = 0.242/0.367/1.251/0.295 ms[root@localhost ~]#

说明：

实例5：时间间隔和次数限制的ping

命令：

ping -c 10 -i 0.5 192.168.120.206

输出：

[root@localhost ~]# ping -c 10 -i 0.5 192.168.120.206PING 192.168.120.206 (192.168.120.206) 56(84) bytes of data.64 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=1.24 ms64 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.235 ms64 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.244 ms64 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.300 ms64 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=0.255 ms64 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=0.264 ms64 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.263 ms64 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.331 ms64 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.247 ms64 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.244 ms--- 192.168.120.206 ping statistics ---10 packets transmitted, 10 received, 0% packet loss, time 4499msrtt min/avg/max/mdev = 0.235/0.362/1.241/0.294 ms[root@localhost ~]# ping -c 10 -i 0.01 192.168.120.206PING 192.168.120.206 (192.168.120.206) 56(84) bytes of data.64 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=0.244 ms64 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.195 ms64 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.219 ms64 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.204 ms64 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=3.56 ms64 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=1.93 ms64 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.193 ms64 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.193 ms64 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.202 ms64 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.211 ms--- 192.168.120.206 ping statistics ---10 packets transmitted, 10 received, 0% packet loss, time 90msrtt min/avg/max/mdev = 0.193/0.716/3.564/1.080 ms[root@localhost ~]#

说明：

实例6：通过域名ping公网上的站点

命令：

ping -c 5 www.58.com

输出：

peida-VirtualBox ~ # ping -c 5 www.58.comPING www.58.com (211.151.111.30) 56(84) bytes of data.64 bytes from 211.151.111.30: icmp_req=1 ttl=49 time=14.7 ms64 bytes from 211.151.111.30: icmp_req=2 ttl=49 time=16.4 ms64 bytes from 211.151.111.30: icmp_req=3 ttl=49 time=15.2 ms64 bytes from 211.151.111.30: icmp_req=4 ttl=49 time=14.6 ms64 bytes from 211.151.111.30: icmp_req=5 ttl=49 time=19.9 ms--- www.58.com ping statistics ---5 packets transmitted, 5 received, 0% packet loss, time 20101msrtt min/avg/max/mdev = 14.618/16.192/19.917/1.965 mspeida-VirtualBox ~ #

说明：

实例7：多参数使用

命令：

ping -i 3 -s 1024 -t 255 192.168.120.206

输出：

[root@localhost ~]# ping -i 3 -s 1024 -t 255 192.168.120.206PING 192.168.120.206 (192.168.120.206) 1024(1052) bytes of data.1032 bytes from 192.168.120.206: icmp_seq=1 ttl=64 time=1.99 ms1032 bytes from 192.168.120.206: icmp_seq=2 ttl=64 time=0.694 ms1032 bytes from 192.168.120.206: icmp_seq=3 ttl=64 time=0.300 ms1032 bytes from 192.168.120.206: icmp_seq=4 ttl=64 time=0.481 ms1032 bytes from 192.168.120.206: icmp_seq=5 ttl=64 time=0.415 ms1032 bytes from 192.168.120.206: icmp_seq=6 ttl=64 time=0.600 ms1032 bytes from 192.168.120.206: icmp_seq=7 ttl=64 time=0.411 ms1032 bytes from 192.168.120.206: icmp_seq=8 ttl=64 time=0.281 ms1032 bytes from 192.168.120.206: icmp_seq=9 ttl=64 time=0.318 ms1032 bytes from 192.168.120.206: icmp_seq=10 ttl=64 time=0.362 ms1032 bytes from 192.168.120.206: icmp_seq=11 ttl=64 time=0.408 ms1032 bytes from 192.168.120.206: icmp_seq=12 ttl=64 time=0.445 ms1032 bytes from 192.168.120.206: icmp_seq=13 ttl=64 time=0.397 ms1032 bytes from 192.168.120.206: icmp_seq=14 ttl=64 time=0.406 ms1032 bytes from 192.168.120.206: icmp_seq=15 ttl=64 time=0.458 ms--- 192.168.120.206 ping statistics ---15 packets transmitted, 15 received, 0% packet loss, time 41999msrtt min/avg/max/mdev = 0.281/0.531/1.993/0.404 ms[root@localhost ~]#

说明：

-i 3 发送周期为 3秒 -s 设置发送包的大小为1024 -t 设置TTL值为 255

转载于:https://www.cnblogs.com/shanheyongmu/p/6045828.html

你可能感兴趣的文章

项目Beta冲刺（团队）——用户试用调查报告

查看>>

Python爬虫入门教程 58-100 python爬虫高级技术之验证码篇4-极验证识别技术之一